Power Supply Units - Sun Microsystems StorEdge MultiPack Series User Manual

3. Swing the drive bracket handle closed until it latches.
4. Remove the wrist strap.
5. Replace the left side cover (
Push on the right side of the door to ensure the door is completely latched.

Power Supply Units

Caution – You must shut down the operating system and turn the power off before
you open the Sun StorEdge MultiPack unit to remove the power supply.
To Remove the Old Power Supply
1. Refer to the Solaris Handbook for SMCC Peripherals that came with your computer to
shut down the operating system.
The handbook is included in the AnswerBook online documentation.
2. Shut off the power to the Sun StorEdge MultiPack unit (
3. Disconnect the SCSI cable and the power cord from the Sun StorEdge MultiPack
enclosure ( FIGURE 1-1
).
FIGURE 2-2
).
).
FIGURE 1-1
Chapter 2 Parts Replacement 35