Safety Precautions - Dranetz PR150/SP1B User Instructions

SAFETY PRECAUTIONS

The following safety precautions must be followed whenever any type of
voltage or current connection is being made to the instrument.

When connecting to electric circuits or pulse initiating equipment,
open their related breakers. DO NOT install any connection of the
instrument on live power lines.

Connections must be made to the instrument first, then connect to
the circuit to be monitored.

Wear proper personal protective equipment, including safety glasses
and insulated gloves when making connections to power circuits.

Hands, shoes and floor must be dry when making any connection to
a power line.

Make sure the unit is turned OFF before connecting probes to the
rear panel.

Before each use, inspect all cables for breaks or cracks in the
insulation. Replace immediately if defective.

If the equipment is used in a manner not specified in this user's
guide, the protection provided by the equipment may be impaired.

These safety precautions are repeated where appropriate throughout
this manual.
5