Names And Functions Of Parts; Main Unit - Pentax EPK-i Owner's Manual

1

Names and Functions of Parts

Main Unit

Bottle Connector
Insert the nozzle of a
water bottle.
Ventilation Grid
Ventilation grid for the
cooling fan.
Note
Install the
processor in a
location where the
ventilation grid will
not be blocked.
Lamp Cartridge
Access Door
Open this door when you
want to replace the lamp
cartridge.
Power Switch R
Press this switch to turn
the processor on or off.
NOTE
Be sure to turn off the processor before you attach or remove the scope.
The light guide and electrical connector of the scope and the pins may be hot immediately after use. Do not touch these
parts. Hold a plastic part of the scope when, for example, removing the scope.
Endoscope Electrical Connector
Insert the electrical connector of a scope.
Scope Locking Lever
Locking/unlocking lever for when you
attach or remove a scope.
Operation Panel
I“"Operation Panel”"
(P.8)
Touch Panel
Light Guide Attachment
Insert the light guide of a scope.
Names and Functions of Parts
1
7