Air/Water Supply Inspection - Pentax EPK-i Owner's Manual

Air/Water Supply Inspection

1
Press Q on the operation panel and make sure the
Q LED lights and you can hear the pump operating.
2
Press UV of [Air Flow] on the touch panel and
make sure the strength of the air flow changes
accordingly.
3
Place a finger on the opening on the air/water supply
button of the scope and make sure air flows from the
distal end of the scope.
3
4
Fully press the air/water supply button of the scope
and make sure water comes out of the distal end of
the scope.
Only perform an endoscopic examination if all the inspection items are working properly. If any of the above functions
is not working properly or you feel there is an abnormality, stop using the scope immediately and contact our service
personnel.
20
Pre-use Inspections
Air
Supply
Water
Supply
LAMP
PUMP
WHITE
BALANCE