laguna Plasma Level 2 CNC Owner's Manual page 7

OPERATOR (Cont'd.)-
5.) Wear proper clothing. Do not wear watches, rings, jewelry, or loose-fitting clothes.
6.) Avoid all moving parts of the machine or workpiece when setting up or operating the
equipment. Never reach into the machine while it is active. Use the "EMERGENCY STOP Button"
or the "CYCLE STOP Button" function to stop machine motion.
Never use the machine DWELL Time Code for parts removal or other operator intervention
activities that puts the operator in a hazardous position.
7.) Recognize and avoid unsafe operating conditions.
8.) Maintain a clean work area. Avoid accidents by keeping work areas clean and neat.
9.) Never leave the machine in an unsafe condition.
10.) Never leave a machine running unattended.
11.) Never remove or bypass safety devices.
12.) Report any unsafe conditions, personal injury, or machine problems immediately to your
appropriate supervisor(s) and safety manager(s). In case of personal injury notify Service
Department giving a brief description and date reported injury occurred. Never operate the
machine with someone within a hazardous area.
7