laguna Plasma Level 2 CNC Owner's Manual page 69

21.) Basic Operations (Cont'd.)-
CNC CONTROL NAVIGATION (Cont'd.)-
The blocks shown correspond to the related "FUNCTION Keys" at the top of the Operator's
keypad.
To select the corresponding block, "Press the FUNCTION Key"- (Example: [F1] for AUTO in the
diagram below).
The "ESCAPE" functions on either side of the block, cancels out the active function and returns to
the previous page.
THE SCREEN IS NOT A TOUCH SCREEN.
ESCAPE (ESC)
ESCAPE (ESC)
[F1]-AUTO
69