laguna Plasma Level 2 CNC Owner's Manual page 3

1.) Safety Rules & Protocols-
As with all machinery, there are certain hazards involved with the operation and use. Using it with
caution will considerably lessen the possibility of personal injury. However, if normal safety
precautions are overlooked or ignored, personal injury to the operator may result. If you have any
questions relative to the installation and operation, do not use the equipment until you have
contacted your supplying distributor. Read carefully before operating the machine.
1.) Keep the working area clean and be sure adequate lighting is available.
2.) Do not wear loose clothing, gloves, bracelets, necklaces, or ornaments. Wear face, eye,
respiratory and body protection devices as indicated for the operation or environment.
3.) Be sure that the power is disconnected from the machine before tools are serviced or an
attachment is to be fitted or removed.
4.) Never leave the machine with the power on.
5.) Do not use dull, gummy or cracked cutting tools. 6. Be sure that the keys and adjusting
wrenches have been removed and all the nuts and bolts are secured.
3