15.) Parts of the CNC Plasma (Cont'd.)-
3.) Plasma Cutting Head-The plasma cutting head is moved along the gantry by a precision rack-
and-pinion system that is controlled by the machine controller. The plasma cutting head is moved
vertically by a precision ball screw system that is controlled by the machine controller.
4.) Frame-The frame is a heavy welded construction that supports all the other parts of the
machine.
5.) Controller/Electrical Cabinet-The Controller/Electrical cabinet is located on the side of the
machine. The enclosure houses all the electrical components for controlling and powering the
machine.
6.) Caterpillar Track-The caterpillar track runs along the side of the machine and across the gantry
in a trough and carries all the electrical cables and gas pipes.
7.) Emergency Stop-To reset the emergency stop, twist clockwise and it will pop out.
8.) Supporting Feet-There are supporting feet that are used to level the machine.
9.) Oiler-The oiler connects to all the relevant slides on the machine and when pumped by hand
will lubricate all the relevant slides.
46