Perkins 1104D Operation And Maintenance Manual page 80

Hide thumbs Also See for 1104D:
Table of Contents

Advertisement

80
Maintenance Section
Crankcase Breather (Canister) - Replace
4. Clean the cooling system filler cap and inspect the
gasket. If the gasket is damaged, discard the old
filler cap and install a new filler cap. If the gasket is
not damaged, use a suitable pressurizing pump in
order to pressure test the filler cap. The correct
pressure is stamped on the face of the filler cap. If
the filler cap does not retain the correct pressure,
install a new filler cap.
Crankcase Breather (Canister)
- Replace
NOTICE
Ensure that the engine is stopped before any servic-
ing or repair is performed.
Note: The breather assembly is not installed on all
engines.
1. Place a container under the canister (1).
2. Clean the outside of the canister. Use a suitable
tool in order to remove the canister.
Illustration 40
Typical example
3. Lubricate the O ring seal (2) on the new canister
(3) with clean engine lubricating oil. Install the new
canister. Tighten the canister to 12 N·m (8 lb ft).
Do not overtighten the canister.
4. Remove the container. Dispose of the old canister
and any split oil in a safe place.
Driven Equipment - Check
i02866782
Refer to the OEM specifications for more information
on the following maintenance recommendations for
the driven equipment:
• Inspection
• Adjustment
• Lubrication
• Other maintenance recommendations
Perform any maintenance for the driven equipment
which is recommended by the OEM.
Engine - Clean
Personal injury or death can result from high
voltage.
Moisture
conductivity.
Make sure that the electrical system is OFF. Lock
out the starting controls and tag the controls " " DO
NOT OPERATE" " .
Accumulated grease and oil on an engine is a fire
hazard. Keep the engine clean. Remove debris and
fluid spills whenever a significant quantity accumu-
lates on the engine.
Failure to protect some engine components from
washing may make your engine warranty invalid. Al-
low the engine to cool for one hour before washing
the engine.
g01428096
can
create
paths
NOTICE
NOTICE
SEBU8172-04
i02151646
i01909392
of
electrical

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents