DeWalt DCS777 Original Instructions Manual page 34

EnGLIsh
CORDLESS COMPACT MITRE SAW
DCS777
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
e
development and innovation make D
partners for professional power tool users.
Technical Data
Voltage
Type
XPS
Power output
Blade diameter
Blade bore
Max. blade speed
Mitre (max. positions)
Bevel (max. positions)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
mitre 50°
bevel 45°
bevel 48°
Overall dimensions
Weight
Noise values and/or vibration values (triax vector sum) according to EN62841:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this information sheet has
been measured in accordance with a standardised test given in EN62841
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level
represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly
maintained, the vibration and/or noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should
also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the
effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm (relevant for vibration), organisation
of work patterns.
32
WALT one of the most reliable
e
DCS777
V 54
DC
2
Yes
W 1750
mm 216
mm 30
min -1 6300
left and right 50°
left 48°
bevel 45°
mitre 45°
mm 60 x 270
mm 60 x 190
mm 60 x 170
mm 48 x 270
mm 45 x 270
mm 460 x 560 x 430
kg 15.0
dB(A) 90
dB(A) 105
dB(A) 3
EC-Declaration of Conformity
Machinery Directive
Cordless Compact Mitre Saw
DCS777
WALT declares that these products described under Technical Data are
D
e
in compliance with:
2006/42/EC, EN62841-1:2015 +AC:2015; EN62841-3-9:2015 +AC:2016
+A11:2017.
These products also comply with Directive, 2014/30/EU and 2011/65/EU.
For more information, please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
20.09.2019
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WALT at the following address or
e
WALT.
e