Product Overview; Inline Network Adapter Description - Cisco Wide Area Application Engine WAE-674-K9 Installation Manual

Wae inline network adapter
Hide thumbs Also See for Cisco Wide Area Application Engine WAE-674-K9:
Table of Contents

Advertisement

Product Overview

IMPORTANT SAFETY INSTRUCTIONS
Warning
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Product Overview
This section contains the following topics:
The minimum software release required for the inline network adapter is WAAS 4.0.7.
Note

Inline Network Adapter Description

WAAS software versions prior to 4.2.1 support one optional 4-port Ethernet inline network adapter on
WAE-7341/WAE-7371/WAE-674 appliances. Up to two inline network adapters are supported using
WAAS software version 4.2.1 or later.
The inline network adapter is a full-height, three-quarter-length PCI-X network interface card that
contains four independent Gigabit Ethernet ports. (See
Figure 1
Installing the Cisco WAE Inline Network Adapter
2
Inline Network Adapter Description
Ports and LED Indicators
Adapter Specifications
Inline Network Adapter
Figure
1.)
OL-12480-03

Advertisement

Table of Contents
loading

Table of Contents