Cisco Wide Area Application Engine WAE-674-K9 Installation Manual page 15

Figure 8
2
1 Riser card assembly
Place the riser card assembly on a flat, static-protective surface.
Step 6
Remove the expansion slot cover for Slot 1. (See
Step 7
Note
OL-12480-03
Removing the Riser Card Assembly
1
Rear
You must install PCI expansion slot covers on all vacant slots so that you can maintain the
electronic emissions characteristics of the appliance and ensure proper cooling of internal
components.
Installing Adapters in the WAE-512 and WAE-612 Appliances
Front
2 Rear edge of riser card
Figure 9.)
Installing the Cisco WAE Inline Network Adapter
15