Connecting the 56/64 Kbps Card to the Network................................................................................................2
56/64 Kbps WAN Interface Card LEDs..............................................................................................................2
Related Information.............................................................................................................................................3
WIC−1DSU−56K4 Cable Specifications Document ID: 46794 Introduction Prerequisites Requirements Components Used Conventions WIC−1DSU−56K4 WAN Interface Card Cables Connecting the 56/64 Kbps Card to the Network 56/64 Kbps WAN Interface Card LEDs Related Information Introduction This document provides cable specifications for the WIC−1DSU−56K4 WAN interface card. Prerequisites Requirements There are no specific requirements for this document.
Cables The 4−wire Channel Service Unit/Data Service Unit (CSU/DSU) module uses a standard straight−through RJ−45 cable to connect from the RJ−48S jack on the CSU/DSU to the wall jack. Connector Pinout RJ−48S Pin Connecting the 56/64 Kbps Card to the Network This connection requires a straight−through RJ−48S−to−RJ−48S or a straight−through RJ−48C−to−RJ−48C cable.
Need help?
Do you have a question about the WAN Interface Card WIC-1DSU-56K4 and is the answer not in the manual?
Questions and answers