Televes Avant User Instructions page 31

User instructions
Detailed description of the different menus
1.- Input ports configuration:
The LED "A" is ON with this option.
It allows the assignation of TV channels to the configurable UHF input ports in the following way:
A B C
A B C
A B C
The input UHF3 is always assigned to the programmable single-channel 0.
2.- Selection of TV channels for each programmable single-channel
To select this menu, press the
The LED "B" is ON with this option.
It selects the desired UHF TV channel (21 to 69) so that it is assigned for each programmable single-channel (1 to
9).
The first digit indicates which programmable single-channel we are assigning and the last two indicate the UHF
TV channel selected.
REMARK: When we are not using any of the programmable single-channels we must switch it OFF
the channel - -.
A B C
A B C
The unit allows the programming of strictly adjacent channels, both by the same as well as by different inputs.
When adjacent channels are programmed by the same input, the adjustment may not be as precise as when they are
programmed by different inputs.
3.- Selection of the UHF output level
To select this menu, press the
The LED "C" is ON with this option.
This menu sets the UHF output level and depending on this, it automatically fixes the VHF and FM levels 5 and 8
dB below, respectively. The margin that is allowed ranges from 115 to 100 dBµV.
A B C
UHF1 input assigned to the first nine programmable single-channels (1 to 9).
UHF2 input is disabled.
UHF1 assigned to the first seven programmable single-channels (1 to 7).
UHF2 assigned to the eighth and ninth programmable single-channels.
UHF1 assigned to the first six programmable single-channels (1 to 6).
UHF2 assigned to the seventh, eighth and ninth programmable single-channels.
button from menu 1.
Single-channel 2, channel 35.
Single-channel 5, channel switched OFF.
button from menu 2.
UHF output level 110 dBµV.
31
"Avant"
selecting