Product Description; Delivery Content; Name Plate - Mennekes Amtron Xtra E Installation Manual

3. Product description

The devices may differ due to customer or country-specific
requirements. Depending on the model, the device may
differ visually from the illustrations in this guide.
3.1

Delivery content

Fig.: 1. Delivery content
1. Device
2. RFID cards (2x master, 3x user)
3. Hex wrench
4. Bag with installation hardware
(screws, dowels, sealing plugs)
5. Operating manual
6. Installation manual
7. Set-up data sheet
8. Drilling jig
Optional
1)
Without set-up data sheet, access to certain func-
tions and the configuration is not possible.
f Keep the device data sheet in a safe place.
f Contact the MENNEKES support if you have
lost it.
Î "1.1 Service"
1)
The device can be used with or without MENNEKES
Charge APP. The MENNEKES Charge APP is not supplied.
However, it is available free of charge in the App Store and
the Google Play Store.
MENNEKES recommend using the device with the
MENNEKES Charge APP.

3.2 Name Plate

The name plate contains all important device data. The pic-
tured name plate is a pattern.
f Note the name plate on your device. The name plate is
installed on the housing base.
1
XXXXXXXXX
2
Typ.SN:
3
In : xx A
4
A
U : xxx V ~
5
n
f : xx Hz
6
n
IEC 61851, DIN IEC/TS 61439-7
7
8
Fig.: 2. Name plate (pattern)
1. Manufacturer
2. Type
3. Item / serial number
4. Rated current
5. Rated voltage
6. Frequency
7. Standard
8. Barcode
9. Number of phases
10. Protection class
11. Usage
xxxxxxxx.xxxxx
xP+N+
9
IPxx
10
AEVCS
11
EN
5