DeWalt DWS778 Original Instructions Manual page 28

english
CROSS-CUT MITRE SAW
DWS778
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter mm
Blade bore mm
Max. blade speed min
Cutting depth mm
Max. blade thickness mm
Mitre (max. positions) left and right
Bevel (max. positions)
Compound mitre bevel
mitre
Capacities
cross-cut 90° mm
mitre 45° mm
mitre 48° mm
bevel 45° mm
bevel 48° mm
Overall dimensions mm
Weight
Noise values and vibration values (triax vector sum) according to EN61029
L (emission sound pressure level) dB(A)
PA
L (sound power level)
dB(A)
WA
K (uncertainty for the given
dB(A)
sound level)
Vibration emission value a = m/s
h
Uncertainty K = m/s
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission
level represents the main applications of the tool.
However if the tool is used for different applications,
with different accessories or poorly maintained, the
vibration emission may differ. This may significantly
increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
26
WALT one of the
e
DWS778
QS/GB LX
V 230 115
V 230 115
2 2
W 1850 1650
250 250
30 30
4300 4100
-1
85 85
1.75 1.75
50° 50°
left 48° 48°
45° 45°
45° 45°
85 x 305
85 x 215
85 x 204
58 x 305
54 x 305
465 x 615 x 390
kg 17.2
94 94
107 107
3.0 3.0
2 2.4 2.4
2 1.5 1.5
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
NOTE: This device is intended for the connection to a power
supply system with maximum permissible system impedance
Zmax of
0.25 Ohm at the interface point (power service box) of user's
supply.
The user has to ensure that this device is connected only to a
power system which fulfils the requirement above. If necessary,
the user can ask the public power supply company for the
system impedance at the interface point.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
CROSS-CUT MITRE SAW
DWS778
D WALT declares that these products described under Technical
e
Data are in compliance with:
2006/42/EC, EN61029-1:2009 +A.11:2010, EN61029-2-11:2012
+A11:2013.
10 Amperes, mains
13 Amperes, in plugs