Ingersoll-Rand 7/26E Operation & Maintenance Manual page 9

Operation & Maintenance Manual
Foreword
The contents of this manual are considered to be proprietary and confidential to Ingersoll
Rand and should not be reproduced without the prior written permission of Ingersoll Rand.
Nothing contained in this document is intended to extend any promise, warranty or
representation, expressed or implied, regarding the Ingersoll Rand products described
herein. Any such warranties or other terms and conditions of sale of products shall be in
accordance with the standard terms and conditions of sale for such products, which are
available upon request.
This manual contains instructions and technical data to cover all routine operation and
scheduled maintenance tasks by operation and maintenance staff. Major overhauls are
outside the scope of this manual and should be referred to an authorised Ingersoll Rand
service department.
The design specification of this machine has been certified as complying with EC
directives. As a result:
a. Any machine modifications are strictly prohibited, and will invalidate EC
certification.
b. A unique specification for USA/Canada is adopted and tailored to the
territory.
All components, accessories, pipes and connectors added to the compressed air system
should be:
• of good quality, procured from a reputable manufacturer and, wherever possible,
be of a type approved by Ingersoll Rand.
• clearly rated for a pressure at least equal to the machine maximum allowable
working pressure.
• compatible with the compressor lubricant/coolant.
• accompanied with instructions for safe installation, operation and maintenance.
Details of approved equipment are available from Ingersoll Rand Service departments.
The use of repair parts/lubricants/fluids other than those included within the Ingersoll Rand
approved parts list may create hazardous conditions over which Ingersoll Rand has no
control. Therefore Ingersoll Rand cannot be held responsible for equipment in which non-
approved repair parts are installed.
Ingersoll Rand reserves the right to make changes and improvements to products without
notice and without incurring any obligation to make such changes or add such
improvements to products sold previously.
The intended uses of this machine are outlined below and examples of unapproved usage
are also given, however Ingersoll Rand cannot anticipate every application or work
situation that may arise.
IF IN DOUBT CONSULT SUPERVISION.
10
Foreword
22221949