Advertisement
Available languages
Available languages
9. TECHNICAL SPECIFICATIONS
9.1. POWER AMPLIFIER WITH MUSIC SOURCES (A-5120M2 / A-5240M2)
Model
Supply
Mains voltage
Battery voltage
Output power
Max
Rated
Outputs
Inputs
Frequency response
Total harmonic distortion
Signal to noise ratio
Tone controls
Controls
Indicators
AC power consumption
DC power consumption
Chime
Priority
Dimensions ( H x W x D )
Weight
Color
Mounting options
A-5120M2 / A-5240M2 Version 1.1
A-5120M2 / A-5240M2
A-5120M2
AC 115V/230V ,50/60 Hz ±10% , Switchable
DC 24 V (max.10% deviation)
180 W
120 W
Speaker outputs: 8 Ω, 25 V, 70 V, 100 V
MOH output : 8 Ω / 1 W and 600 Ω / 1 V balanced
MIC1: 250 Ω / 1 mV. Balanced with phantom power selectable (Jump 1)
MIC2: 250 Ω / 1 mV. Balanced with phantom power selectable (Jump 2)
MIC3: 250 Ω / 1 mV. Balanced with phantom power selectable (Jump 3)
MiC4: 250 Ω / 1 mV. Balanced with phantom power selectable (Jump 4)
AUX: 47 kΩ / 200 mV. Unbalanced.
TEL: 0,1 ~ 1 V / 600 Ω. Adjustable. Balanced
Less than1% at 1 kHz,rated power
All Volume Controls C.C.W : 75 dB below rated power
MIC1 ~ MIC4: 60 dB below rated power
AUX: 70 dB below rated power
TELl: 70 dB below rated power
MIC1 ~ MIC4: volume control
Line (Aux/Tuner/CD/Cassette): volume control
Tone controls: BASS / TREBLE
ZONE1 / ZONE2: push buttons
AC 115 V / 230 V: voltage selector switch
Power indicator (LED),output level meter (3 LEDS)
400 W
8 A
Two tone chime (Ding-done attention signal preceding a call).
Priority level (Using for MIC1~5, the XLR connector or phone jack)
TEL / Emergency: Priority 1 (highest)
MIC2 - MIC3 - MIC4 - Aux / Tuner/ CD-Tape: Priority 3 (lowest)
88 × 430 × 300 mm
Approx : 10 kg
Table top or, 19" rack mountable
Line out: 600 Ω / 1 V
60 Hz ~ 15 kHz ±3 dB
Bass : ±10 dB at 100 Hz
Trebble: ±10 dB at 10 kHz
MASTER: volume control
TEL: input level control
MOH: output level control
MIC1: Priority 2
Black
Amplifier
A-5240M2
360 W
240 W
760 Ws
16 A
88 × 430 × 385 mm
Approx : 13 kg
Page 8 of 9
Advertisement
Chapters
