Crown CT18024 Original Instructions Manual page 16

Power tool specifications
Breaker
Power tool code
Rated power
Power output
Amperage at voltage
Impact rate
Single impact power
Chuck type
Weight
Safety class
Sound pressure
Acoustic power
Weighted vibration
Noise information
Always wear ear protection if the sound
pressure exceed 85 dB(A).
Declaration of conformity
We declare under our sole responsibility that the
product described under "Power tool specifications"
is in conformity with all relevant provisions of the di-
rectives 2006/42/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-6�
Certification
manager
Merit Link International AG
Stabio, Switzerland, 08�08�2018
WARNING - To reduce the risk of injury,
user must read instruction manual!
General safety rules
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and / or serious injury.
[230-240 V ~ 50 Hz]
[W]
[W]
230 V [A]
]
-1
[min
[J]
[kg]
[lb]
[dB(A)]
[dB(A)]
[m/s ]
2
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operat-
ed (cordless) power tool�
Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents�
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes�
• Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to lose
control�
Wu Cunzhen
Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Un-
modified plugs and matching outlets will reduce risk
of electric shock�
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded�
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk
of electric shock�
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
English
16
CT18024
421654
1700
1000
7�7
1300
45
HEX-30
15,5
34�18
83,77
105
1,5
CT18024S
423719
1700
1000
7�7
1300
45
HEX-30
15,8
34�84
83,77
105
1,5