Start Up; Operation - Kärcher Puzzi 8/1 C Manual

Hide thumbs Also See for Puzzi 8/1 C:
Table of Contents

Advertisement

Available languages

Available languages

brochure "Safety indications for brush
cleaning appliances and spray extrac-
tion appliances".

Start up

Figure 1, see cover page
Insert the holder for the floor nozzle
(optional) into the appliance and
lock into place.
Figure 2, see cover page
Insert the suction hose into the suc-
tion hose connection on the appli-
ance.
Insert the coupling of the fresh wa-
ter hose into the fresh water con-
nection of the appliance and lock
into place.
Connect the suction hose to bender
of the manual nozzle.
Connect the coupling of the fresh
water hose to the bender and lock
into place.
Selecting the nozzle
Upholstery, wall rugs,
automobile interior
cleaning
Carpeting
Stairs
* not included in the delivery

Operation

Figure 3, see cover page
Mix fresh water and detergent in a
clean container (use the concentra-
tion recommended for the deter-
gent).
Manual noz-
zle (110 mm)
Floor nozzle
(230 mm) *
Carpet noz-
zle *
Warning
Health risk, risk of damage. Observe
all indications on the detergent used.
Note
Warm water (max. 50°C) will increase
the cleaning effect.
For considerate treatment of the envi-
ronment use detergent economically.
Fill detergent solution into the fresh
water reservoir. The fill level must
not exceed the "MAX" mark.
Insert dirt water reservoir into the
appliance and attach lid.
Insert the plug into the socket.
Figure 4, see cover page
Press the suction switch to turn on
the suction turbine.
Press the spray switch to turn on
the detergent pump.
Warning
Risk of damage. Check the object to be
cleaned prior to using the appliance in
an inconspicuous place for colour fast-
ness and water resistance.
Figure 5, see cover page
Use the lever on the bender to
spray on detergent solution.
Run across the surface to be
cleaned in overlapping paths. Pull
the nozzle backwards (do not
push).
Figure 6, see cover page
During nozzle changes, the manual
nozzle can be inserted into the
holder for the manual nozzle.
Empty the dirt water reservoir.
If the dirt water reservoir is full,
switch off the suction and spray
switches.
Remove the lid.
7
English

Advertisement

Table of Contents
loading

Table of Contents