Philips Sonicare HealthyWhite+ Manual page 10

10
English
2 Firmly press the brush head down onto the metal shaft until it
stops (Fig. 3).
Note: Philips Sonicare brush heads are imprinted with icons to easily
identify your brush head (Fig. 4).
Charging your Philips Sonicare
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger (Fig. 5).
-
The flashing light of the battery level indicator indicates that the
-
When the battery is fully charged, the battery level indicator lights
Note: It can take up to 48 hours to fully charge the battery, but the
Philips Sonicare may be used before it is fully charged.
Using the appliance
Brushing instructions
1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
(45 degrees), pressing firmly to make the bristles reach the gumline
or slightly beneath the gumline (Fig. 7).
Note: Keep the center of the brush in contact with the teeth at all
times.
3 Press the power on/off and mode button to turn on the Philips
Sonicare.
4 Apply light pressure to maximize Philips Sonicare's effectiveness
and let the Philips Sonicare toothbrush do the brushing for you.
Do not scrub.
35_020_9630_2_DFU-booklet simple_A6_v1.indd 10
toothbrush is charging.
up solid green for 10 seconds before it turns off.
18/12/15 13:42