Philips Sonicare ProtectiveClean Troubleshooting

Download this manual

Troubleshooting

How do I charge my Philips Sonicare

toothbrush

Charging the battery of your Philips Sonicare toothbrush is easy as 1-2-3. Find out how to charge

your Philips Sonicare toothbrush properly.

1) Plug the charger into a live electric power outlet

2) Place the handle on the charger

3) The flashing light on the handle indicates that the toothbrush is charging

4) It takes at least 24 hours to fully charge the battery

Please note:



In step 3 above, if the battery charge indicator on the handle does not blink green, you

may not have the charger plugged into a live outlet. To confirm that the charger is

plugged into a live outlet, press the on/off button while the handle is sitting on the

charger.



The handle should not activate when it is charging in a normal manner. If the handle

turns on in the charger, repeat steps 1 - 3 using a different power outlet. If you repeat the

procedure and your handle continues to activate while on the charger, contact the Philips

call center for instructions

Charging your Philips Sonicare DiamondClean and

DiamondClean Smart toothbrush

1) Plug the chrome base charger into a live electric power outlet

2) Place the glass on the chrome base

3) Place your Philips Sonicare DiamondClean or DiamondClean smart into the glass in an

upright position

4) The flashing light on the handle indicates that the toothbrush is charging*. If the indicator

does not start flashing, keep the handle in the charger for at least 10-15 minutes to allow the

toothbrush to recover

5) It takes at least 24 hours to fully charge the battery

DiamondClean Smart toothbrushes (in addition to a flashing battery indicator) will also

illuminate at the bottom and you will hear a beep.

Philips Sonicare PowerUp

Page 1 Troubleshooting How do I charge my Philips Sonicare toothbrush Charging the battery of your Philips Sonicare toothbrush is easy as 1-2-3. Find out how to charge your Philips Sonicare toothbrush properly. Most Philips Sonicare toothbrushes 1) Plug the charger into a live electric power outlet...
Page 2 Sonicare 3-Series Gum Care How often do I need to replace my brush head? We recommend you to replace your Philips Sonicare brush head after 3 months of use. Based on brushing twice a day for 2 minutes each session.
Page 3 A small gap is necessary A small gap is necessary. The Philips Sonicare Brush head must be free to move in order to deliver the vibrations needed to clean your teeth.