Extra Possibilities - Philips SRU 5110/87 Manual

11 PICTURE
AUDIO
SLEEP
12 /
13 P P
1
14 - PROG +
15 OK
16 BACK
17 y Standby
18 LED
Note
If the device does not respond at all, or not to all of the key commands,
follow the instructions under '2.3 Setting the remote control.
4

Extra possibilities

Restoring the original functions of your remote control
Keep keys 1 and 6 on the SRU 5110 pressed simultaneously for three
1
seconds, until the LED flashes twice and then remains lit.
Press keys 9, 8 and 1, in that order.
2
• The LED flashes twice.
All original functions have now been restored and any extra functions
have been deleted.
Keys and functions
changes picture / screen settings.
changes audio settings.
enlarges Text TV picture.
shows subtitle text.
activates / deactivates sleep timer.
holds current Text TV page.
selects between one- and two-figure channel
numbers.
selects previous programme / channel
selects a previous or following channel.
confirms your selection.
jumps back one level in the menu or turns off the
menu.
switches TV on or off.
• blinks in setup mode.
• lights up when a remote control command is
sent.
11
10
10
11
7