Extra Possibilities; Adjusting Device Selection (Mode Keys); Adding A Function To The Remote Control - Philips SRU 520/87 Instructions For Use Manual

SRU520_87_v6.qxd
Instructions for use

4. Extra possibilities

Adjusting device selection (Mode keys)

The SRU520 is default set for operating TV,VCR or DVD.You can select the
device you wish to operate with TV and DVD/VCR selection buttons. Each
key allows operation of one device only. If desired, you can program the keys
to select a different kind of device.
For example, if you want to operate a second TV.
In the following example you will see how to configure the VCR/DVD key for
a second TV.
1
Switch on the second TV.
2
Press the DVD/VCR key to select DVD/VCR.
Press the key until the it lights up.
3
Then keep keys 1 and 6 on the SRU520
pressed simultaneously for three seconds,
until the VCR/DVD key lights up.
4
Press keys 9, 9 and 2, in that order.
5
Press the TV key to select TV. Press the key
until it lights up.
6
Press the 1 key.
– The VCR/DVD key flashes twice.
The VCR/DVD key will now allow you to
operate your second TV.
7
Program the SRU520 to operate the second
TV.
See 'Setting the remote control'.

Adding a function to the remote control

If you want to add a function to the SRU520, you can contact the
Philips service line for Universal Remote Control to ask for the 5-figure code
for the extra function.
8
26-04-2005 14:38 Pagina 8