Table of Contents
Advertisement
Available languages
Available languages
XP SBC RU 510/00.3 05-02-2004 16:43 Pagina 9
4. Extra possibilities
Adding a function to the remote control
If you want to add a function to the RU510, you can contact the
Philips service line for Universal Remote Control to ask for the 3-figure code
for the extra function.
1
Keep 1 and 6 on the RU510 pressed
simultaneously for three seconds, until the
green LED flashes twice and then remains lit.
2
Press keys 9, 9 and 4, in that order
3
Enter the 3-figure code which you received from the service line within
thirty seconds.
4
Press the key under which you want to store the new function.
–
The LED flashes twice.
The extra function has been successfully added to the RU510.
•
If you want to store the function under Shift in combination with
another key, first press the Shift key and then press the required
function key.
•
For restoring the original function of the key,
see 'Restoring the original functions of your remote control'.
Restoring the original functions of your remote
control
1
Keep keys 1 and 6 on the RU510
pressed simultaneously for three seconds,
until the green light flashes twice and then
remains lit.
2
Press keys 9, 8 and 1, in that order
–
The light flashes twice.
All original functions have now been restored
and any extra functions have been deleted.
Instructions for use
1
2
3
4
5
6
7
8
9
0
SHIFT
1
2
3
4
5
6
7
8
9
0
SHIFT
1
2
3
4
5
6
7
8
9
0
SHIFT
1
2
3
4
5
6
7
8
9
0
SHIFT
9
Advertisement
Chapters
Table of Contents
