Operation; Accessories (Optional); Declaration Of Conformity; Manufacturer's Warranty - STEINEL IR 180 Manual

• Press programming button and make program settings. (Fig� 4�5)
(➜ "5� Operation")
• Fit the sensor module into the surround and press together with metal
frame (support ring).
5� Operation
Note:
You will find an application description at knx�steinel�de. All factory settings
may be found in the application descriptions.
1. Issue physical address and generate application program in the ETS.
2. Load the physical address and application program into the wall switch.
When you are prompted, press the programming button (E).
3. The red LED goes out once programming has been successfully completed.
Integrated button
The button function is defined in the ETS.
6� Accessories (optional)
User remote control RC7 (EAN 4007841 592912)
Functions:
- Light ON/OFF 4 h
- User reset
- Adjust dimming level
- Save / load scenarios
Service remote control RC6 (EAN 4007841 593018)
Functions:
- Reach adjustment
- Time setting CH1 / CH2
- ON delay / room surveillance, CH2
- Test / normal mode
- Teach-IN
- Reset
- IQ mode
Smart Remote (EAN 4007841 009151)
- Control via smartphone or tablet
- Replaces all remote controls
- Download appropriate app and connect via Bluetooth
Detailed descriptions are provided in the operating instructions for the particu-
lar remote control
- 18 -
7� Disposal
Electrical and electronic equipment, accessories and packaging must be
recycled in an environmentally compatible manner.
Do not dispose of electrical and electronic equipment as domestic
waste.
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equip-
ment and its implementation in national law, electrical and electronic equipment
no longer suitable for use must be collected separately and recycled in an
environmentally compatible manner.
8� Declaration of Conformity
STEINEL Vertrieb GmbH hereby declares that the HF 180 KNX radio
equipment type conforms to Directive 2014/53/EU. The full wording of the
EU Declaration of Conformity is available for downloading from the following
Internet address: www.steinel.de
9� Manufacturer's Warranty
As purchaser, you are entitled to your statutory rights against the vendor. If
these rights exist in your country, they are neither curtailed nor restricted by
our Warranty Declaration. We guarantee that your STEINEL Professional sensor
product will remain in perfect condition and proper working order for a period
of 5 years. We guarantee that this product is free from material-, manufactur-
ing- and design flaws. In addition, we guarantee that all electronic components
and cables function in the proper manner and that all materials used and their
surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage
paid with the original receipt of purchase, which must show the date of
purchase and product designation, either to your retailer or contact us at
STEINEL (UK) Limited, 25 Manasty Road, Axis Park, Orton Southgate,
Peterborough, PE2 6UP, for a returns number. For this reason, we recom-
mend that you keep your receipt of purchase in a safe place until the warranty
period expires. STEINEL shall assume no liability for the costs or risks involved
in returning a product.
For information on making claims under the terms of the warranty, please go to
www�steinel-professional�de/garantie
- 19 -