Operation; Setup & Commissioning - STEINEL IS 360 W Installation Instructions Manual

6

Operation

The IS 360 operates by turning lights
on automatically when occupancy
is detected and off when the space
is left vacant and the time delay has
elapsed.
The light level feature keeps lighting
off during daylight hours, regardless
of occupancy.
Setup & Commissioning
Time Delay
Test mode
• Ensure that the sensor is in test
mode.
- set time delay to position 1
(minimum setting of 10 sec).
- set light level to position 1
(light level function overridden).
www.steinel.net
(800) 852-4343
Adding a wall switch provides a
manual override function. While
the switch is ON, the sensor is in
occupancy control mode. Users can
turn the switch OFF at any time to
keep lights OFF.
• Turn power ON at the circuit break-
er (lights will turn ON). After a warm
up period of up to one minute,
lights will turn OFF if the sensor
does not detect motion.
• Walk in view of sensor, lights should
turn ON. Be still for 10 sec. and lights
should turn OFF.
Light Level