Configuring Audio Options - HP iPAQ rx5700 User Manual

Configuring Audio Options

If you are using headphones, you can enable the equalizer and 3D sound. You can also enable
automatic gain control (AGC) or create your own settings for the microphone.
To modify audio settings, tap Start > Settings > System tab > Audio.
To enable the headphone equalizer:
1. Tap the Equalizer tab.
2. Select Enable Headphone Equalizer.
3. Adjust the equalizer sliders individually, or select preconfigured sound settings from the Mode list.
To save your own equalizer settings:
1. Tap New.
2. Name your configuration.
3. Set the equalizer.
4. Tap Save.
To enable headphone 3D sound:
1. Tap the 3D Sound.
2. Select Enable 3D.
3. Move the slider to the right to increase the 3D sound effect.
By default, AGC is enabled. To create your own customized microphone settings:
1. Tap Mic tab.
2. Clear Enable AGC.
3. Move the microphone sensitivity slider to the meet your preference, or select preconfigured settings
from the Mode list.
4. Tap Save.
Configuring Audio Options 21