Removing A Secure Digital (Sd) Card - HP iPAQ rx5700 User Manual

Removing a Secure Digital (SD) Card

To remove an SD card from the SD slot on your HP iPAQ:
1. Close all programs that are using the SD card.
2. Remove the card from the SD slot by lightly pushing down on the card to unlock it.
3. When the card disengages and pops up, pull it from the SD slot.
NOTE
the SD slot when not in use.
HP recommends inserting the protective plastic card that came with your HP iPAQ into
Chapter 17 Secure Digital (SD) Cards 136