Creating, Ending, And Accepting A Bluetooth Partnership - HP iPAQ hx2000 Additional Information

Creating, Ending, and Accepting a Bluetooth
Partnership
You can create a partnership between your HP iPAQ and another device
that has Bluetooth capabilities. Once you do this, the devices must have
Bluetooth turned on but don't need to be discoverable for you to beam
information between them.
1. Be sure the two devices are turned on, discoverable, and within
close range.
Tap Start > Settings > Connections tab.
2.
Tap Bluetooth > Devices tab > New Partnership. Your HP
3.
iPAQ searches for other devices with Bluetooth capabilities and
displays them in the list.
Tap the name of the other device, and tap Next.
4.
In Passkey, if you want to use a passkey (recommended for
5.
enhanced security), enter an alphanumeric passkey between 1
and 16 characters, and tap Next. Otherwise, leave the Passkey
field blank and tap Next.
6. Enter the same passkey on the other device.
7. To give the partnership a more meaningful name, change the
name of the device in Name.
Tap Finish.
8.
To end a Bluetooth Partnership:
Tap Start > Settings > Connections tab.
1.
2. Tap Bluetooth > Devices tab.
Tap and hold the partnership you want to end.
3.
Tap Delete.
4.
To accept a Bluetooth Partnership:
1. Be sure your device is turned on, discoverable, and within close
range.
Continued
90