CREE LIGHTING Cadiant Quick Start Manual page 6

screen.
5 5
Point the Configuration Tool at the SmartCast
Wireless Gateway until the flashing blue LED becomes
a steady green.
The Configuration Tool will shine a green flashlight
beam in the direction it is pointed to aid in targeting the
SWG-WiFi. (This may take up to 10 seconds.)
6 6
At this point, the Configuration Tool display will
indicate that the SWG has been added to the network.
Press the OK OK button.
The SmartCast ® Wireless Gateway with WiFi has
now been added to the network.
STEP 3: SET UP THE SMARTCAST TOUCHSCREEN
1 1
The Touchscreen display should read:
®