CREE LIGHTING Cadiant Quick Start Manual page 3

1 1
POWER ON POWER ON the Configuration Tool.
2 2
Wait for the Configuration Tool to read:
The display will indicate that the Configuration Tool is
ready to begin OneButton™ Setup.
Press OK OK to begin commissioning the SmartCast
network.
However, if the Configuration Tool finds existing
networks, the display will read:
Use the Configuration tool direction arrows to highlight
Set Up New Set Up New and click OK
found, we recommend using the Set Up New
3 3
The display will instruct you to place the Configuration
Tool down on a level surface while conducting OneButton
Setup.
During OneButton Setup, the luminaires and dimmers are
performing the following functions to automatically
commission themselves.
1. Formation of a secure wireless network
OK. Even if new networks are
Set Up New feature.
®