Inserting/Ejecting The Disk; Inserting The Disk - PRIMERGY PG-DVA102D User Manual

4

Inserting/Ejecting the Disk

When reading disk data, because the disk revolves at high speed, it may vibrate or
make a wind noise.
Keep the tray closed unless ejecting or inserting a disk. If dust settles in the product it
may cause device failure.
If the balance of the disk is off centre or a sticker is stuck on the disk, this product will
vibrate causing a decrease in performance and a possible failure in read and write
operations.
Disks can only be inserted/ejected when the server is operational.
Do not touch the lens of the tray with your hand. This may cause device failure.
4.1

Inserting the disk

1
Check that the power is turned on and press the eject button.
The tray comes out slightly.
Eject button
4 Inserting/Ejecting the Disk
E
45