Component Names And Functions - PRIMERGY PG-DVA102D User Manual

2
Component Names and
Functions
This section explains the component names and functions.
Tray
Insert the disk.
Access LED
The status of the device is indicated by LEDs as follows.
Device status
When "Ready" or the disk is not
inserted
When accessing the disk
Eject button
Press this button to open the tray when ejecting or inserting a disk. ( "4 Inserting/Ejecting the
Disk"(pg.45))
The eject button may be locked by the application rendering it impossible to open the tray by pressing
this button. If this occurs end the application and then press the button.
Manual eject hole
Insert a pin in the manual eject hole to open the tray manually.
Do not use the manual eject hole under normal conditions.
Tray
Eject button
Access LED
LED Display
OFF
Blinking
Manual eject hole

2 Component Names and Functions

E
41