MikroTik Audience LTE6 kit Manual

Audience LTE6 kit
Audience LTE6 kit
Audience - home access point for reliable network build. Easy to outspread wireless network
coverage by adding more Audience devices to it. You will be able to move with your wireless
appliance within network range and Audience devices will bond the same (SSID) with it.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This unit is intended to be installed in the rackmount. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
This product is intended to be installed indoors. Keep this product away from water, fire, humidity or hot environments.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
This is a class A device. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures.
Exposure to Radio Frequency Radiation: This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment. This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the
general public.

Connecting

Insert Micro SIM card see (SIM slot usage).
Plug the included power adapter to start up the device (see "
The device will boot up, the front led indicator will light in solid blue, and the Wireless network will be available for connecting.
Open network connections on your PC, mobile phone, or other device and search for MikroTik wireless network and connect to it.
Once connected to the wireless network, open
default, you will be logged in automatically. For mobile phones use the application (see "
Click the "Check for updates" button and update your RouterOS software to the latest version, need to have a valid SIM card.
Choose WebFig tab, on the left menu, choose CAPsMAN.
Click on the Security Cfg.
Click to add new:
Choose Authentication Type: WPA PSK, WPA2 PSK;
Powering ").
https://192.168.88.1 in your web browser to start configuration, since there is no password by
Mikrotik Mobile App ").