Using The Scene Function; (Scene); Recalling A Scene; Scene Edit - Roland JUPITER-X Owner's Manual

Using the Scene Function

When you turn on the power, the first screen that appears is the SCENE
TOP screen.
Here you can switch between scenes when playing.
Scene bank–Scene number Scene name
9 : Key Sw is ON
+ : Arpeggio part
8 : Key Sw is OFF
: Current part
-
_ : Part Sw is OFF : Being edited
5
simultaneously

Recalling a Scene

1.
Press the [SCENE] button
* The SCENE TOP screen is the first screen that appears when you turn on
the power.
* When the [PART] button is lit, press the
SCENE TOP screen.
2.
Use the [1]–[16] buttons
* Press the [ENTER] button to display the scene list. You can select a scene.
* If the SYSTEM parameter SCENE LOCK is "ON", a confirmation screen
appears when you switch scenes.
Switching between scene banks and recalling scenes
1.
Hold down the [SHIFT] button
buttons to select a scene bank.
2.
Use the [1]–[16] buttons
* To recall a different scene bank than the one that's currently selected,
select the scene bank and then press the
* You can also use the [1] and [2] knobs
at the same time you turn the knob.

Scene Edit

Here's how to edit the scene parameters.
1.
Press the [SCENE] button
2.
Press the PAGE [>] button
EDIT screen.
3.
Use the [1] knob to select a parameter.
4.
Use the [2] knob to edit the value.
5.
When you're finished editing, press the
return to the scene screen.
Save the scene after you've finished editing.
&"Saving a Scene"
(p. 13)
Current internal
temperature
Bluetooth Sw
9 : PARTIAL Sw is ON
8 : PARTIAL Sw is OFF
– : Being edited
to access the SCENE TOP screen.
[PART] button to return to the
to select a scene.
and press the [1]–[16]
to select a scene.
[1]–[16] buttons.
to switch scenes. The scene changes
to access the top screen.
to move to the SCENE COMMON
[EXIT] button

(SCENE)

Saving a Scene

The edits that you make to a part or tone, or the data that you record,
are temporary. They are lost when you turn off the power, or when
you select another scene or tone. If you want to keep the result of your
editing or recording, you must save it to a scene.
* If you want to save a tone individually, use the tone write operation (p.
15).
1.
Hold down the
The WRITE MENU screen appears.
2.
Use the [1] knob
press the [ENTER]
3.
Use the [1] knob
press the [ENTER]
If you want to rename the scene that's being saved, use the
[<] [>] buttons to move the cursor and use the
characters.
4.
Press the [ENTER]
A confirmation message appears.
If you decide to cancel, press the
5.
To execute, press the
to
[SCENE] button and press the
or [2] knob to select "SCENE", and then
button.
to select the save-destination, and then
button.
[2] knob
button.
[EXIT] button.
[ENTER] button.
[WRITE] button.
PAGE
to specify
13