Advertisement
Do you have a question about the E-28 and is the answer not in the manual?
how do I setup an E28 keyboard as a controller for the JV1080?
To set up a Roland E-28 keyboard as a controller for the JV-1080, follow these steps:1. Connect MIDI Cable: Use a MIDI cable to connect the MIDI OUT port of the E-28 to the MIDI IN port of the JV-1080.2. Power On Devices: Turn on both the E-28 and the JV-1080.3. Set MIDI Channel: Ensure that the E-28 is transmitting on the same MIDI channel that the JV-1080 is set to receive.4. Adjust Keyboard Settings: Configure the E-28 to function as a MIDI controller by disabling internal sounds if necessary.5. Verify Sound Output: Play the E-28 and check if the JV-1080 produces sound. Adjust settings on both devices as needed.These steps will allow the E-28 to control the JV-1080 via MIDI.
This answer is automatically generated
Need help?
Do you have a question about the E-28 and is the answer not in the manual?
Questions and answers
how do I setup an E28 keyboard as a controller for the JV1080?
To set up a Roland E-28 keyboard as a controller for the JV-1080, follow these steps:
1. Connect MIDI Cable: Use a MIDI cable to connect the MIDI OUT port of the E-28 to the MIDI IN port of the JV-1080.
2. Power On Devices: Turn on both the E-28 and the JV-1080.
3. Set MIDI Channel: Ensure that the E-28 is transmitting on the same MIDI channel that the JV-1080 is set to receive.
4. Adjust Keyboard Settings: Configure the E-28 to function as a MIDI controller by disabling internal sounds if necessary.
5. Verify Sound Output: Play the E-28 and check if the JV-1080 produces sound. Adjust settings on both devices as needed.
These steps will allow the E-28 to control the JV-1080 via MIDI.
This answer is automatically generated