Main Specifications - Roland JUPITER-X Owner's Manual

JUPITER-X Owner's Manual Ver. 3.0 and later
• When disconnecting all cables, grasp the
connector itself—never pull on the cable. This
way you will avoid causing shorts, or damage to
the cable's internal elements.
• A small amount of heat will radiate from the unit
during normal operation.
• To avoid disturbing others nearby, try to keep the
unit's volume at reasonable levels.
• When disposing of the packing carton or
cushioning material in which this unit was
packed, you must observe the waste disposal
regulations that apply to your locality.
• Use only the specified expression pedal. By
connecting any other expression pedals, you risk
causing malfunction and/or damage to the unit.
• Do not use connection cables that contain a
built-in resistor.
Using External Memories
• Please observe the following precautions when
handling external memory devices. Also, make
sure to carefully observe all the precautions that
were supplied with the external memory device.
• Do not remove the device while reading/
writing is in progress.
• To prevent damage from static electricity,
discharge all static electricity from your person
before handling the device.
Caution Regarding Radio Frequency
Emissions
• The following actions may subject you to penalty
of law.
• Disassembling or modifying this device.
• Removing the certification label affixed to the
back of this device.
• Using this device in a country other than
where it was purchased

Main Specifications

Roland JUPITER-X: Synthesizer
61 Keys (semi-weighted keyboard and channel aftertouch)
Keyboard
AC 117-240 V 50/60 Hz
Power Supply
20 W
Power Consumption
1,090 (W) x 447 (D) x 119 (H) mm
Dimensions
42-15/16 (W) x 17-5/8 (D) x 4-11/16 (H) inches
16.9 kg / 37 lbs 5 oz
Weight
Owner's Manual
Accessories
Power cord
Before using this unit, carefully read "IMPORTANT SAFETY INSTRUCTIONS" (inside front cover), "USING THE UNIT SAFELY" (p. 2), and "IMPORTANT NOTES" (p. 3).
After reading, keep the document(s) where it will be available for immediate reference.
© 2020 Roland Corporation
4
Intellectual Property Right
• It is forbidden by law to make an audio
recording, video recording, copy or revision of
a third party's copyrighted work (musical work,
video work, broadcast, live performance, or
other work), whether in whole or in part, and
distribute, sell, lease, perform or broadcast it
without the permission of the copyright owner.
• Do not use this product for purposes that could
infringe on a copyright held by a third party. We
assume no responsibility whatsoever with regard
to any infringements of third-party copyrights
arising through your use of this product.
• The copyright of content in this product
(the sound waveform data, style data,
accompaniment patterns, phrase data, audio
loops and image data) is reserved by Roland
Corporation.
• The copyright of content in this product
(the sound waveform data, style data,
accompaniment patterns, phrase data, audio
loops and image data) is reserved by Roland
Corporation.
• Purchasers of this product are NOT permitted to
extract said content in original or modified form,
for the purpose of distributing recorded medium
of said content or making them available on a
computer network.
• This product contains eParts integrated software
platform of eSOL Co.,Ltd. eParts is a trademark of
eSOL Co., Ltd. in Japan.
• The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Roland is
under license.
• This Product uses the Source Code of μT-Kernel
under T-License 2.0 granted by the T-Engine
Forum (www.tron.org).
Options
* This document explains the specifications of the product at the time that
the document was issued. For the latest information, refer to the Roland
website.
• Roland is an either registered trademark or
trademark of Roland Corporation in the United
States and/or other countries.
• Company names and product names appearing
in this document are registered trademarks or
trademarks of their respective owners.
• In this manual, company names and product
names of the respective owners are used
because it is the most practical way of describing
the sounds that are emulated using DSP
technology.
Keyboard Stand: KS-10Z, KS-12
Pedal Switch: DP series
Expression Pedal: EV-5
USB Flash drive (*)
* Use a commercially available USB flash drive. However, we cannot
guarantee that all commercially available USB flash drives will
work.