Assembly Instructions - Kobalt 6904 Manual

ASSEMBLY INSTRUCTIONS

WARNING
• Remove the impact wrench from the package and examine it carefully. Do not discard the
carton or any packaging material until all parts have been examined.
• If any part of the impact wrench is missing or damaged, do not plug the tool in or use it until
the part has been repaired or replaced. Failure to heed this warning could result in serious
injury.
Selecting The Correct Socket
CAUTION
• Always verify that the tool is switched off and unplugged before installing any accessories
on the tool.
Always use the correct size socket for bolts and nuts. An incorrect socket will result in
inaccurate and inconsistent fastening torque and/or damage to the bolt or nut.
Installing And Removing The Socket (Fig. 2)
To install the socket, push it onto the anvil of the
tool until it locks into place.
To remove the socket, simply pull it off.
2
socket
anvil
8