Installing the power connector port
1. Replace the power connector cable on the computer.
2. Route the cable through the routing channel
3. Replace the M2.5x5.0 screw to secure the power connector port to the computer.
4. Connect the power connector cable.
5. Install the:
a.
base cover
b.
battery
c.
battery cover
6. Follow the procedure in
Palm rest
Removing the palmrest
1. Follow the procedure in
2. Remove the:
a.
battery cover
b.
battery
c.
base cover
d.
hard drive
e.
keyboard
3. Remove the 15 screws (M2.5x5.0, M2.0x8.0, M2.0x3.0) at the bottom of the computer which secure the palmrest to the
computer .
24
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.