Installing the display panel
For non touch systems perform following steps.
NOTE:
1. To install the display panel:
a. Connect the eDP cable to the connector on the back of the display panel and affix the adhesive tape.
b. Align the display panel with the tabs on the display assembly.
c. Replace the M2.0X3 screws to secure the display panel to the display assembly.
2. Install the:
a.
display bezel
b.
display assembly
c.
palmrest
d.
keyboard
e.
hard drive
f.
base cover
g.
battery
h.
battery cover
3. Follow the procedure in
Removing the display panel
For touch systems perform following step.
NOTE:
1. Follow the procedure in
2. Remove the:
a.
battery cover
b.
battery
c.
base cover
d.
hard drive
e.
keyboard
44
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.