1. Follow the procedure in
2. Remove the:
a.
battery cover
b.
battery
c.
base cover
d.
hard drive
e.
keyboard
f.
palmrest
g.
display assembly
h.
display bezel
i.
display panel
3. To remove display bracket:
a. Remove the M2.5x4.0 screws that secure display cover [1].
b. Remove the display brackets from the display cover [2].
Installing the display bracket
For non touch systems perform following steps.
NOTE:
1. Place the display brackets in its slot on the display cover.
2. Replace the M2.5x4.0 screws to secure the display bracket..
3. Install the:
a.
display panel
b.
display bezel
c.
display assembly
d.
palmrest
e.
keyboard
f.
hard drive
g.
base cover
h.
battery
Before working inside your
computer.
Disassembly and reassembly
47