c.
base cover
d.
hard drive
e.
keyboard
f.
palmrest
g.
display assembly
h.
display bezel
3. To remove camera:
a. Peel the eDP cable and disconnect the camera cable from the computer [1].
b. Lift the camera module from the computer [2].
Installing the camera
For non touch systems perform following steps.
NOTE:
1. Place the camera module in its slot on the computer.
2. Connect the camera cable.
3. Affix the eDP cable.
4. Install the:
a.
display bezel
b.
display assembly
c.
palmrest
d.
keyboard
e.
hard drive
f.
base cover
g.
battery
h.
battery cover
5. Follow the procedure in
After working inside your
computer.
Disassembly and reassembly
51