Manageability screen options
Option
Description
Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.
MEBx Hotkey
Default Setting: Enable MEBx Hotkey
Allows you to speed up the boot process by bypassing some of the compatibility steps. The options are:
Fastboot
● Minimal (default)
● Thorough
● Auto
Allows you to create an additional preboot delay. The options are:
Extended BIOS
● 0 seconds. This option is enabled by default.
POST Time
● 5 seconds
● 10 seconds
Allows you to specify whether the Full Screen Log (disabled by default).
Full Screen Log
● Prompt on warnings and errors (selected by default)
Warnings and
● Continue on warnings
errors option
● Continue on warnings and errors
Virtualization support screen options
Option
Description
Allows you to enable or disable the Intel Virtualization Technology.
Virtualization
Enable Intel Virtualization Technology (default).
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities
VT for Direct I/O
provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O - enabled by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
Trusted
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Execution
Technology, and Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution
Wireless screen options
Option
Description
Allows to set the wireless devices that can be controlled by the wireless switch. The options are:
Wireless Switch
● WWAN
● GPS (on WWAN Module)
● WLAN
● Bluetooth
All the options are enabled by default.
Allows you to enable or disable the internal wireless devices.
Wireless Device
● WWAN/GPS
Enable
● WLAN
● Bluetooth
For WLAN and WiGig enable or disable controls are tied together and they cannot be enabled
NOTE:
or disabled independently.
BIOS setup
73