PERMASTEEL 80QT Use & Care Manual
Hide thumbs
Also See for 80QT:
- Use & care manual (42 pages) ,
- Use & care manual (12 pages) ,
- Use & care manual (33 pages)
Related Manuals for PERMASTEEL 80QT
Summary of Contents for PERMASTEEL 80QT
- Page 1 Permasteel 80QT Cooler Use & Care Guide Model number: PS-203F1 Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us 1-888-287-0735 or visit www.permasteel.life...
-
Page 2: Table Of Contents
Table of content Important Information Thank you for your purchase of our Patio Cooler. Important Information We sincerely hope you will enjoy using our fine products. Parts List Please take time to read these instructions • Hardware thoroughly and follow each step carefully for safe and easy operation. -
Page 3: Parts List
M6 x 16 Hex Socket Bolt M5 x 35 Phillips Screw M6 x 16 Bolt M8 Washer Washer If you are missing any parts or have damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 Pacific Time. For replacement, visit us at www.permasteel.life... -
Page 4: Hardware
Hardware The following hardware is provided in a poly bag. M8x16mm Hex Socket Bolt: 8 pcs M6x16mm Hex Socket Bolt: 10 pcs M5x35mm Phillips Screw & Washer: 2 pcs each (Note: Attached to lid knobs) M6x16mm Bolt: 2 pcs (Note: Pre-installed on body) M8 Washer: 8 pcs Tools Included: Tools... -
Page 5: Assembly Steps
Assembly Instructions Step 1 • Turn body (basin) upside down, place it on a clean, soft surface and attach 4 legs (G) to body (D) with (4) M8x16mm hex socket bolts (AA) and (4) M8 washers (EE). Note: Do not fully tighten the bolts. Legs should be loose so that it can be aligned with the holes on the bottom shelf. - Page 6 Step 2: • Attach the bottom shelf (H) to the legs (G) with (4) M8x16mm hex socket bolts (AA) and (4) M8 washers (EE). Note: Do not fully tighten the bolts. Legs and bottom shelf should be loose so that it can be aligned with the holes for the casters.
- Page 7 Step 3 • Attach the body handles (C) to body (D) using (8) M6x16mm hex socket bolts (BB), 4 bolts for each handle, and tighten with the provided Allen wrench. Allen Wrench...
- Page 8 Step 4 • Attach the bottle opener (E) to body (D) using (2) M6x16mm hex socket bolts (BB) and tighten with the Allen wrench. • Attach the cap catcher (F) to body (D) by sliding it down over the 2 pre-installed bolts (DD). Allen Wrench...
- Page 9 Step 5 • Note: The lid knobs (A) are pre-attached to the lid (B) with (2) M5x35mm Phillip's screws (CC) and (2) washers (FF). They are upside down. • Please remove the knobs using a Phillips screwdriver and re-assemble them on the lid right-side up.
-
Page 10: Care & Maintenance
1-888-287-0735, between 8:00 a.m. to 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of warranty claims after 30 days from the purchase date. - Page 11 We hope you enjoy your product and we are always here for you: Visit us at: www.permasteel.life Customer Service: 1-888-287-0735 Email: service@permasteel.life Distributed by Permasteel Inc. 100 Exchange Place Pomona, CA 91768 Designed in California, Made in China...