Related Manuals for PERMASTEEL PS-205
Summary of Contents for PERMASTEEL PS-205
- Page 1 Wood Grain Style Steel 80QT Cooler Use & Care Guide Model number: PS-205 Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us (888)-287-0735 or visit www.permasteel.life...
-
Page 2: Table Of Contents
Table of content Important Information Thank you for your purchase of our Patio Cooler. Important Information We sincerely hope you will enjoy using our fine products. Parts List Please take time to read these instructions • Hardware thoroughly and follow each step carefully for safe and easy operation. -
Page 3: Parts List
M6 x 20 Bolt M6 x 16 Bolt M5 x 15 Shoulder Bolt M4 x 30 Screw If you are missing any parts or have damaged parts, please call 888-287-0735 M-F 8:00-5:00 Pacific Time. For replacement, visit us at www.permasteel.life... -
Page 4: Hardware
Hardware The following hardware is provided in a poly bag. M6x13mm Bolt: 10 pcs M6x20mm Bolt: 4 pcs M6X16mm Bolt: 4 pcs M6x15mm Shoulder Bolt: 2 pcs M4X32mm Screw: 2 pcs (Note: Attached to lid knobs) Tools Included: Tools The following tools are required for assembly: •... -
Page 5: Assembly Steps
Assemble Steps Step 1 • Turn body (basin) upside down, place it on a clean, soft surface and attach 2 leg frames (G) to body (D) with (4) M6x13mm bolts (AA) for each leg frame, a total of 8 bolts. Note: Do not fully tighten the bolts. - Page 6 Step 2: • Attach the bottom shelf (H) to the leg frames (G) with (4) M6x20mm bolts (BB). Note: Do not fully tighten the bolts until the bottom shelf is lined up with the holes for the leg frames. • Now, tighten all the bolts left loose from step 1.
- Page 7 Step 3 • Insert casters (I & J) into the leg frame holes and thread them into each leg frame using the provided open end wrench.
- Page 8 Step 4 • Attach the body handles (C) to body (D) using (4) M6x16mm bolts (CC), 2 bolts for each handle, and tighten with the provided Allen wrench.
- Page 9 Step 5 • Attach the bottle opener (E) to body (D) using (2) M6x13mm bolts (AA) and tighten with the Allen wrench. • Attach the cap catcher (F) to body (D) using (2) M6x15mm shoulder bolts (DD).
- Page 10 Step 6 • Note: The lid knobs (A) are pre-attached to the lid (B). They are upside down. • Please remove the knobs using a Phillips head screwdriver and re-assemble them on the lid right-side up.
-
Page 11: Care & Maintenance
888-287-0735, between 8:00 a.m. and 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of warranty claims after 30 days from the purchase date. - Page 12 We hope you enjoy your product and we are always here for you: Visit us at: www.permasteel.life Customer Service: 888-287-0735 Email: service@permasteel.life Distributed by Permasteel Inc. 100 Exchange Place Pomona, CA 91768 Designed in California, Made in China...