Related Manuals for PERMASTEEL PS-208
Summary of Contents for PERMASTEEL PS-208
- Page 1 Permasteel 80QT Cooler Use & Care Guide Model number: PS-208 Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us 1-888-287-0735 or visit www.permasteel.life...
-
Page 2: Table Of Contents
Table of content Important Information Thank you for your purchase of our Patio Cooler. Important Information We sincerely hope you will enjoy using our fine products. Parts List Please take time to read these instructions • Hardware thoroughly and follow each step carefully for safe and easy operation. -
Page 3: Parts List
Supporting Rack Caster Caster with Brake M6 x 16 Hex Bolt M5 x 35 Screw M5 Washer If you are missing any parts or have damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 Pacific Time. For replacement, visit us at www.permasteel.life... -
Page 4: Hardware
Hardware The following hardware is provided in a poly bag. M6x16mm Hex Bolt: 8 pcs M5x35mm Screw: 2 pcs (Note: Attached to lid knobs) M5 Washer: 2 pcs (Note: Attached to lid knobs) Tools The following tools are required for assembly: •... -
Page 5: Assembly Steps
Assembly Instructions Step 1 • Turn body (basin) upside down, place it on a clean, soft surface and attach 4 legs (G) to body (D) with (8) M8x16mm hex socket bolts (AA), 2 bolts for each leg. Note: Do not fully tighten the bolts. Legs should be loose so that it can be aligned with the holes on the supporting rack and casters.. - Page 6 Step 2: • Attach the supporting rack (H) to the legs (G). Insert and thread casters (I) through the supporting rack holes and into two legs on the same side. • Insert and thread casters (J) through the supporting rack holes and into other two legs on the •...
- Page 7 Step 3 • Attach the cap catcher (F) to body (D) by sliding it down over the 2 pre-installed bolts.
- Page 8 Step 4 • Note: The lid knobs (A) are pre-attached to the lid (B) with (2) M5x40mm screws (BB) and (2) M5 washers (CC). They are upside down. • Please remove the knobs using a Phillips screwdriver and re-assemble them on the lid right-side up.
- Page 9 Step 5 • Congratulations! You have now completed the patio cooler assembly.
-
Page 10: Care & Maintenance
1-888-287-0735, between 8:00 a.m. to 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of warranty claims after 30 days from the purchase date. - Page 11 We hope you enjoy your product and we are always here for you: Visit us at: www.permasteel.life Customer Service: 1-888-287-0735 Email: service@permasteel.life Distributed by Permasteel Inc. 100 Exchange Place Pomona, CA 91768 Designed in California, Made in China...