Related Manuals for PERMASTEEL PS-209
Summary of Contents for PERMASTEEL PS-209
- Page 1 Permasteel 80QT Cooler Use & Care Guide Model number: PS-209 Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us 1-888-287-0735 or visit www.permasteel.life...
-
Page 2: Table Of Contents
Table of content Important Information Thank you for your purchase of our Patio Cooler. Important Information We sincerely hope you will enjoy using our fine products. Parts List Please take time to read these instructions • Hardware thoroughly and follow each step carefully for safe and easy operation. -
Page 3: Parts List
Caster Caster with Brake M6 x 13 Bolt M6 x 15 Shoulder Bolt M4 x 30 Screw If you are missing any parts or have damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 Pacific Time. For replacement, visit us at www.permasteel.life... -
Page 4: Hardware
Hardware The following hardware is provided in a poly bag. M6x13mm Bolt: 26 pcs M6x15mm Shoulder Bolt: 2 pcs M4X30mm Screw: 2 pcs (Note: Attached to lid knobs) Tools Included: Tools The following tools are required for assembly: • Allen wrench (provided) •... -
Page 5: Assembly Steps
Assembly Instructions Step 1 • Turn body (basin) upside down, place it on a clean, soft surface and attach 4 legs (G) to body (D) with (4) M6x13mm bolts (AA) for each leg, a total of 16 bolts. Note: Do not fully tighten the bolts. Legs should be loose so that it can be aligned with the holes on the bottom shelf and casters. - Page 6 Step 2: • Attach the bottom shelf rail (H) to the legs (G) with (4) M6x13mm bolts (AA). Note: Do not fully tighten the bolts. Legs and bottom shelf rail should be loose so that it can be aligned with the holes on the bottom shelf and casters.
- Page 7 Step 3 • Attach the bottom shelf (I) to the legs (G). • Insert and thread casters (J) through the bottom panel holes and into two legs on the same side using the provided open end wrench. • Insert and thread casters (K) through the bottom panel holes and into two legs on the same side using the provided open end wrench.
- Page 8 Step 4 • Attach the body handle (C) to body (D) using (4) M6x13mm bolts (AA) and tighten with the provided Allen wrench. Allen Wrench...
- Page 9 Step 5 • Attach the bottle opener (E) to body (D) using (2) M6x13mm bolts (AA) and tighten with the Allen wrench. • Attach the cap catcher (F) to body (D) using (2) M6x15mm shoulder bolts (BB). Allen Wrench...
- Page 10 Step 6 • Note: The lid knobs (A) are pre-attached to the lid (B). They are upside down. • Please remove the knobs using a Phillips head screwdriver and re-assemble them on the lid right-side up.
-
Page 11: Care & Maintenance
1-888-287-0735, between 8:00 a.m. to 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of warranty claims after 30 days from the purchase date. - Page 12 We hope you enjoy your product and we are always here for you: Visit us at: www.permasteel.life Customer Service: 1-888-287-0735 Email: service@permasteel.life Distributed by Permasteel Inc. 100 Exchange Place Pomona, CA 91768 Designed in California, Made in China...