PERMASTEEL 80QT Use & Care Manual
Hide thumbs
Also See for 80QT:
- Use & care manual (42 pages) ,
- Use & care manual (12 pages) ,
- Use & care manual (11 pages)
Related Manuals for PERMASTEEL 80QT
Summary of Contents for PERMASTEEL 80QT
- Page 1 Permasteel 80QT Cooler Use & Care Guide Model number: PS-203 Thank you for purchasing your new patio cooler from Permasteel. We hope you enjoy your product. If you have any questions, please call us 1-888-287-0735 or visit www.permasteel.life...
-
Page 2: Table Of Contents
Table of content Important Information Thank you for your purchase of our Patio Cooler. Important Information We sincerely hope you will enjoy using our fine products. Parts List Please take time to read these instructions • Hardware thoroughly and follow each step carefully for safe and easy operation. -
Page 3: Parts List
Caster with Brake M6 x 16 Hex Bolt M6 x 16 Hex Socket Bolt M5 x 40 Screw If you are missing any parts or have damaged parts, please call 1-888-287-0735 M-F 8:00-5:00 Pacific Time. For replacement, visit us at www.permasteel.life... -
Page 4: Hardware
Hardware The following hardware is provided in a poly bag. M6x16mm Hex Bolt: 12 pcs M6x16mm Hex Socket Bolt: 14 pcs M5x40mm Screw: 2 pcs (Note: Attached to lid knobs) Tools Included: Tools The following tools are required for assembly: Allen wrench (provided) •... -
Page 5: Assembly Steps
Assembly Instructions Step 1 • Turn body (basin) upside down, place it on a clean, soft surface and attach 4 legs (G) to body (D) with (3) M6x16mm hex bolts (AA) for each leg, a total of 12 bolts. - Page 6 Step 2: • Insert and thread casters (I) into two legs (G) on the same side. • Insert and thread casters (H) into other two legs (G) on the same side.
- Page 7 Step 3 • Attach the body handles (C) to body (D) using (6) M6x16mm hex socket bolts (BB) for each handle, a total of 12 bolts, and fully tighten with the provided Allen wrench. Allen Wrench...
- Page 8 Step 4 • Attach the bottle opener (E) to body (D) using (2) M6x16mm hex socket bolts (BB) and tighten with the Phillips screwdriver. • Attach the cap catcher (F) to body (D) by sliding it down over the 2 pre-installed bolts.
- Page 9 Step 5 • Note: The lid knobs (A) are pre-attached to the lid (B) with pre-installed (2) M5x40mm screws (CC). They are upside down. • Please remove the knobs using a Phillips screwdriver and re-assemble them on the lid right-side up.
-
Page 10: Care & Maintenance
1-888-287-0735, between 8:00 a.m. to 5:00 p.m. PST. Email: service@permasteel.life or visit us at www.permasteel.life Permasteel Inc. will ship parts free of charge for a period of 30 days from the date of purchase. The consumer is responsible for shipping & handling and processing of warranty claims after 30 days from the purchase date. - Page 11 We hope you enjoy your product and we are always here for you: Visit us at: www.permasteel.life Customer Service: 1-888-287-0735 Email: service@permasteel.life Distributed by Permasteel Inc. 100 Exchange Place Pomona, CA 91768 Designed in California, Made in China...