Installing A Compute Node Cover - Cisco UCS X10c Installation And Service Manual

Installing a Compute Node Cover

Step 8
Recycle the sheet metal and PCBs in compliance with your local recycling and e-waste regulations.
Installing a Compute Node Cover
Use this task to install a removed top cover on the compute node.
Step 1 Notice the cutouts on the rear of the top cover.
These cutouts receive the stopper pins on the compute node.
Step 2
Holding the top cover with the rear angled down, lower it onto the compute node.
Step 3 Slide the compute node's cover until it hits the stopper pins.
Step 4
Lower the front of the top cover onto the compute node.
Step 5 Keeping the compute node's cover flat, slide it forward until the release button clicks.
Cisco UCS X10c Front Mezzanine GPU Module Installation and Service Guide
30
Servicing the GPU Module